All Products — Easy Electro

Pumps

R385 DC 6-12V Mini Water Pump

R385 DC 6-12V Mini Water Pump is a compact non-submersible pump designed for small-scale liquid transfer, aquarium water circulation, automatic plant watering, mini fountains, waterfalls, DIY automation projects, and cooling systems.

₹184

Pumps

6V DC DIY Peristaltic Dosing Pump

6V DC DIY Peristaltic Dosing Pump is a compact liquid dispensing pump designed for controlled fluid transfer in aquariums, laboratories, plant watering systems, chemical dispensing, disinfectant dosing, food-safe liquid movement, and DIY automation projects.

₹499

Pumps

370 Miniature 6V Silent Diaphragm Air Pump

370 Miniature 6V Silent Diaphragm Air Pump is a compact electric diaphragm pump designed for air pumping, vacuum suction, experimental models, beauty instruments, small appliances, sanitizer dispenser projects, aquarium support systems, and DIY electronics applications.

₹337

Pumps

12V DC High Pressure Mini Water Washer Spray Pump

12V DC High Pressure Mini Water Washer Spray Pump is a compact diaphragm pump designed for portable water spraying and cleaning applications. It runs on 12V DC power and can be used with car batteries or other 12V power sources for car washing, gardening, household cleaning, camping, water spraying systems, and DIY cleaning projects.

₹119

Connectors

USB Type-C Female Socket 4-Pin Breakout PCB Board - Pack of 5

USB Type-C Female Socket 4-Pin Breakout PCB Board is a compact connector breakout module designed to access basic USB Type-C power and data pins for electronics projects. It breaks out VBUS, GND, D+, and D- pins with 2.54mm header spacing, making it breadboard-friendly and easy to use in prototyping.

₹115

Connectors

DC Male Barrel Jack Power Connector with Wire - Pack of 12

DC Male Barrel Jack Power Connector with Wire is a DC power connector used for powering CCTV cameras, LED strips, battery-powered circuits, power supply projects, and DIY electronics. It is compatible with standard 5.5mm x 2.1mm DC female power connectors and includes an 18cm wire extension for easy integration into circuits.

₹108

Connectors

DC Female Connector Jack with Wire for Battery Packs and CCTV - Pack of 5

DC Female Connector Jack with Wire is a high-quality DC power socket connector designed for battery packs, CCTV camera power wiring, wall adapter connections, LED projects, power supply circuits, and DIY electronics. It comes with molded wires, solderless design, copper connector contacts, and PVC insulation for reliable low-voltage power connection.

₹105

Motors

3V Coin Type Micro Vibrator Motor 10mm - Pack of 5

3V Coin Type Micro Vibrator Motor 10mm is a compact flat button vibration motor designed for haptic feedback and vibration alert applications. With a 10mm diameter and 2.7mm thickness, it is suitable for small electronic devices where space is limited.

₹110

Motors

MG995 Servo Motor 180 Degree

MG995 Servo Motor 180 Degree is a high-torque servo motor designed for robotics, robotic arms, drones, RC models, automation projects, and motion-control applications. It offers controlled 180-degree rotation, strong torque output, stable operation, and double ball bearing support for smoother movement.

₹251

Motors

SG90 9G Micro Servo Motor 180 Degree - Pack of 2

SG90 9G Micro Servo Motor 180 Degree is a compact and lightweight servo motor designed for robotics, robot arms, RC cars, boats, helicopters, airplanes, and DIY electronics projects. It provides precise 180-degree rotation, fast response, and reliable torque output for small motion-control applications.

₹299

Motors

NEMA17 4.2Kgcm Stepper Motor with D Shaft

NEMA17 4.2Kgcm Stepper Motor with D Shaft is a bipolar stepper motor designed for high-torque precision motion applications. It uses a standard NEMA 17 frame size and offers 1.8 degree step angle control, making it suitable for 3D printers, CNC machines, peristaltic pumps, positioning systems, robotics, and rotating automation projects.

₹540

Motors

28BYJ-48 5V Stepper Motor - Pack of 2

28BYJ-48 5V Stepper Motor is a compact four-phase stepper motor designed for precision movement control in robotics, automation, mini mechanical projects, and electronics learning applications. It operates on 5V DC and offers controlled step-based rotation.

₹158

Motors

RS-775 DC Motor with Ball Bearing 12V to 24V High Torque

RS-775 DC Motor with Ball Bearing is a high-torque round shaft motor designed for robotics, DIY machines, automation projects, drilling tools, high-speed mechanisms, and mechanical prototypes. It operates best at 12V and can run up to 24V where required.

₹189

Motors

12V 200 RPM Johnson Geared DC Motor Grade A

12V 200 RPM Johnson Geared DC Motor Grade A is a heavy-duty geared motor designed for robotics, automation systems, industrial prototypes, and high-torque motion applications. It features a sturdy metal gearbox, 37 mm gearbox diameter, 6 mm shaft with M3 threaded hole, and a powerful 18000 RPM base motor.

₹391

Motors

DC 12V 500RPM Gear Motor Centre Shaft Heavy Duty Motor

DC 12V 500RPM Gear Motor Centre Shaft is a heavy-duty geared motor designed for robotics, industrial applications, educational builds, and motion-based automation projects. It operates on 12V DC and delivers a rated speed of 500 RPM with strong torque support through its attached metal gearbox.

₹149

Motors

12V 300RPM Geared DC Motor

12V 300RPM Geared DC Motor is a compact DC geared motor designed for robotics, wheel control, industrial prototypes, educational projects, and motor-driven automation systems. It features a plastic gearbox that helps increase torque for robotic vehicles and mechanical assemblies.

₹149

Sensors

DS18B20 Waterproof Temperature Sensor Probe - Pack of 5

DS18B20 Waterproof Temperature Sensor Probe pack of 5 is useful for multiple temperature monitoring points, aquarium systems, outdoor sensing, home automation, industrial monitoring, and IoT temperature logging projects.

₹299

Sensors

BMP280 Barometric Pressure and Altitude Sensor Module - Pack of 2

BMP280 Barometric Pressure and Altitude Sensor Module is a compact atmospheric sensor module designed to measure barometric pressure, temperature, and approximate altitude. It supports both I2C and SPI communication, making it suitable for Arduino, Raspberry Pi, ESP boards, and environmental monitoring projects.

₹192

Sensors

Fire Flame Sensor Module 1 Metre Range - Pack of 2

Fire Flame Sensor Module 1 Metre Range is an infrared flame detection sensor designed to detect fire or flame light sources within the 760 nm to 1100 nm wavelength range. It provides a digital output signal for fire alarms, flame detection projects, fire-fighting robots, and safety prototypes.

₹126

Sensors

Rain Drop Detection Sensor Module - Pack of 2

Rain Drop Detection Sensor Module is designed to detect rainfall and water droplets for weather monitoring, rain detection, automation, Arduino projects, and smart irrigation systems. It includes a separate rain board and control board with analog and digital outputs.

₹106

Sensors

Soil Moisture Sensor Module - Pack of 4

Soil Moisture Sensor Module is designed to measure moisture content in soil for smart agriculture, garden automation, irrigation control, plant monitoring, and Arduino-based electronics projects. The module includes a soil probe and measurement board with analog and digital outputs.

₹124

Sensors

MQ-135 Air Quality Gas Sensor Module - Pack of 2

MQ-135 Air Quality Gas Sensor Module is designed to detect air quality and harmful gases such as ammonia, benzene, alcohol, smoke, CO2, NOx, and other gases. It provides both analog and digital outputs, making it suitable for Arduino, Raspberry Pi, ESP boards, and microcontroller projects.

₹192

Sensors

MQ-2 Smoke and Gas Sensor Module - Pack of 2

MQ-2 Smoke and Gas Sensor Module is a gas detection sensor designed for detecting smoke, LPG, propane, hydrogen, methane, alcohol vapour, butane, and other combustible gases. The module offers high sensitivity, fast response time, and adjustable sensitivity through an onboard potentiometer.

₹180

Connectors

2 Pin PCB Mount Screw Terminal Block 5mm Pitch - Pack of 25

2 Pin PCB Mount Screw Terminal Block 5mm Pitch is a PCB connector used for connecting external wires to circuit boards, perfboards, power supply inputs, motors, locks, LED circuits, and other electronic devices. It features a sturdy plastic body, screw-type terminals, and a 5mm pitch for secure wire connection and easy soldering on PCBs.

₹125

Connectors

2 Pin JST XH Female Cable 2.54mm Pitch - Pack of 8

2 Pin JST XH Female Cable 2.54mm Pitch is a high-quality connector cable designed for LED strips, small PCBs, battery connections, modules, sensors, and low-voltage electronics wiring. It comes with a 2-pin JST XH female connector and 15cm wire length for quick plug-in connections in DIY electronics, repair work, embedded systems, and prototyping projects.

₹104

Connectors

JST-PH 2 Pin Female Connector with 30cm Wire 2mm Pitch - Pack of 12

JST-PH 2 Pin Female Connector with 30cm Wire 2mm Pitch is a compact single-side connector cable designed for low-voltage electronics wiring, battery connections, sensor modules, small PCBs, LED projects, and DIY circuit assemblies. It has a 2-pin female JST-PH connector on one side and free wire ends on the other side.

₹124

Connectors

40 Pin Straight Female Header Pins 2.54mm - Pack of 12

40 Pin Straight Female Header Pins 2.54mm are PCB and perfboard connector strips used for tapping out connections, creating reusable header sockets, and connecting modules with male jumper wires. These female berg strips are commonly used on development boards, sensor modules, test boards, evaluation boards, Arduino shields, and custom PCB projects.

₹120

Connectors

Dupont Connector 2.54mm Jumper Wire Pin Header Housing Assorted Kit

Dupont Connector 2.54mm Jumper Wire Pin Header Housing Assorted Kit is a reusable connector housing and crimp pin kit designed for making custom Dupont jumper wires and cable assemblies. It includes assorted 1-pin to 6-pin single-row and double-row connector housings along with male and female metal crimp pins. The kit comes in a sorted plastic box for electronics workstations.

₹381

Connectors

20CM Female to Female Breadboard Jumper Cable 2.54mm 40 Pcs - Pack of 2

20CM Female to Female Breadboard Jumper Cable 2.54mm 40 Pcs is a flexible jumper wire set designed for breadboard prototyping, PCB connections, and development board interfacing. Each set contains 40 female-to-female chromatic jumper wires with 2.54mm pin spacing. This pack of 2 sets includes 80 jumper wires in total.

₹100

Connectors

Male to Female Jumper Wires 20cm Set of 40 - Pack of 3

Male to Female Jumper Wires 20cm Set of 40 is a breadboard connecting wire set designed for prototyping, testing, and interfacing development boards with sensors, modules, and electronic components. Each wire has a male connector on one end and a female connector on the other. This pack of 3 sets includes 120 jumper wires in total.

₹126

Connectors

Male to Male Jumper Wires 20cm Set of 40 - Pack of 3

Male to Male Jumper Wires 20cm Set of 40 is a breadboard connecting wire set designed for quick circuit building, prototyping, testing, and development board connections. Each wire has male connectors on both ends and comes in assorted rainbow colors for easy circuit identification. This pack of 3 sets includes 120 jumper wires in total, making it useful for students, makers, classrooms, repair work, and bulk prototyping.

₹126

ICs & Logic

ATmega328P-PU Microcontroller IC DIP-28

ATmega328P-PU Microcontroller IC DIP-28 is a low-power 8-bit AVR microcontroller widely used in Arduino-compatible electronics projects, embedded systems, automation circuits, robotics, sensor interfaces, and standalone microcontroller builds. It includes 32KB flash memory, 2KB SRAM, 1KB EEPROM, 23 general-purpose I/O lines, 6-channel 10-bit ADC, USART, SPI, I2C interface, timers, interrupts, watchdog timer, and multiple power-saving modes.

₹232

ICs & Logic

L7805CV 5V Linear Voltage Regulator IC TO-220 - Pack of 5

L7805CV 5V Linear Voltage Regulator IC TO-220 is a fixed positive voltage regulator designed to provide a stable 5V output for logic circuits, microcontrollers, sensors, development boards, embedded systems, and general electronics power supply projects. It supports a wide input voltage range and offers output current up to 1.5A with built-in thermal shutdown and short-circuit protection.

₹115

ICs & Logic

74HC00 Quad 2-Input NAND Gate IC DIP-14 - Pack of 12

74HC00 Quad 2-Input NAND Gate IC DIP-14 is a logic gate integrated circuit containing four independent 2-input NAND gates in one package. Each gate performs the NAND logic function and can be used in digital logic circuits, SR latches, alarm circuits, tamper detection circuits, logic trainers, switching circuits, and electronics learning projects.

₹108

ICs & Logic

CD4026 Decade Counter 7-Segment Driver IC DIP-16 - Pack of 4

CD4026 Decade Counter 7-Segment Driver IC DIP-16 is a counter and display driver IC designed for counting input clock pulses and directly driving 7-segment displays. It combines decade counting and 7-segment decoding in one package, making it useful for digital clocks, event counters, frequency counters, score counters, display projects, and digital electronics learning circuits.

₹116

ICs & Logic

CD4017 Decade Counter IC DIP-16 - Pack of 10

CD4017 Decade Counter IC DIP-16 is a CMOS decade counter integrated circuit designed to count clock pulses and activate one of ten decoded outputs sequentially. It is commonly used in LED chaser circuits, counters, frequency dividers, LED matrix projects, timing circuits, sequencers, and digital electronics experiments.

₹110

ICs & Logic

ULN2003 Darlington Array IC DIP-16 - Pack of 12

ULN2003 Darlington Array IC DIP-16 is a high-voltage, high-current driver IC designed for interfacing low-level logic circuits with relays, stepper motors, solenoids, lamps, LED displays, and other power loads. It contains seven Darlington transistor pairs, each with one input and one output.

₹120

ICs & Logic

L293D Dual H-Bridge Motor Driver IC DIP-16 - Pack of 6

L293D Dual H-Bridge Motor Driver IC DIP-16 is a motor driver integrated circuit designed to control DC motors, stepper motors, relays, solenoids, and other inductive loads. It supports bidirectional motor control, allowing speed and direction control from microcontrollers and digital logic circuits.

₹114

ICs & Logic

LM324 Low Power Quad Op Amp IC DIP-14 - Pack of 12

LM324 Low Power Quad Op Amp IC DIP-14 is a low-power operational amplifier IC containing four independent high-gain op-amps in one package. It supports single supply operation from 3V to 32V and dual supply operation from plus-minus 1.5V to plus-minus 16V, making it useful for analog circuit design, signal amplification, sensor interfaces, oscillator circuits, summing amplifiers, multivibrators, and DC gain blocks.

₹108

ICs & Logic

LM358 Dual Op Amp IC DIP-8 - Pack of 15

LM358 Dual Op Amp IC DIP-8 is a dual operational amplifier integrated circuit containing two independent high-gain, internally compensated op-amps. It supports single and split power supply operation and can work from 3V to 32V, making it suitable for battery-powered electronics, signal conditioning, sensor circuits, transducer amplifiers, DC gain blocks, audio projects, and general op-amp experiments.

₹120

Motors

50 RPM 12V Centre Shaft DC Geared Motor

50 RPM 12V Centre Shaft DC Geared Motor is a compact geared motor designed for robotics, automation, wheel-drive systems, and low-speed movement applications. It comes with a gearbox attached to the DC motor and has a centre shaft design for easy connection with wheels or mechanical assemblies.

₹138

Motors

DC 12V 60RPM Gear Motor Centre Shaft Heavy Duty Motor - Pack of 3

DC 12V 60RPM Gear Motor Centre Shaft pack of 3 is designed for multiple robotics, automation, wheel-drive, and mechanical movement projects. Each motor includes a metal gearbox and center shaft for simple wheel or pulley coupling.

₹399

Motors

N20 6V 200 RPM Micro Metal Gear DC Motor

N20 6V 200 RPM Micro Metal Gear DC Motor is a compact high-torque geared motor designed for small robotics, automation, model vehicles, and precision movement projects. It comes with a metal gearbox for improved durability and torque output while maintaining a lightweight design.

₹269

Motors

300 RPM Dual Shaft BO Motor Straight - Pack of 2

300 RPM Dual Shaft BO Motor Straight is a lightweight plastic geared DC motor designed for small and medium robotics projects, DIY vehicles, and automation experiments. It operates on 3V to 12V DC and provides a rated speed of 300 RPM with dual shaft output for easy wheel mounting and balanced movement.

₹138

Pumps

5V Noiseless Mini Submersible Pump with USB Input Plug - Pack of 2

5V Noiseless Mini Submersible Pump with USB Input Plug pack of 2 is a value combo for USB powered fountains, aquariums, hydroponics, plant watering, cooling systems, and DIY water circulation projects.

₹219

Pumps

800L/H 12V DC 5M Brushless Hot Water Circulation Pump

800L/H 12V DC 5M Brushless Hot Water Circulation Pump is a high-performance brushless DC water pump designed for hot water circulation, solar water systems, fountains, aquariums, cooling loops, and DIY fluid transfer projects.

₹1,337

Pumps

DC 12V Brushless Submersible Water Pump 240L/H 3M

DC 12V Brushless Submersible Water Pump 240L/H 3M is a compact ultra-quiet water pump designed for water circulation, pool models, solar water projects, aquarium systems, DIY fountains, cooling systems, and electronics-based water flow applications.

₹429

Pumps

3V to 9V Mini DC Water Submersible Pump - Pack of 8

3V to 9V Mini DC Water Submersible Pump pack of 8 is useful for Arduino controlled pump projects, water circulation models, science kits, school labs, and bulk DIY electronics prototyping.

₹249

Pumps

Mini Submersible Water Pump 3-6V DC - Pack of 4

Mini Submersible Water Pump 3-6V DC is a compact submersible pump designed for small water circulation systems, mini fountains, miniature waterfall models, aquarium projects, DIY electronics, student experiments, and hobby builds.

₹126

Sensors

LDR Light Dependent Resistor Sensor Module - Pack of 3

LDR Light Dependent Resistor Sensor Module is a photosensitive sensor module designed to detect and measure light intensity. It includes an LM393 comparator IC, adjustable sensitivity potentiometer, digital output, and mounting hole for easy installation. This pack of 3 is suitable for automatic lighting, solar tracking, alarm systems, and Arduino projects.

₹105

Sensors

HC-SR501 PIR Motion Detection Sensor Module - Pack of 2

HC-SR501 PIR Motion Detection Sensor Module is a passive infrared motion sensor designed to detect human movement within its sensing range. It uses a pyroelectric sensor with a Fresnel lens and provides a digital output signal for microcontroller projects. This pack of 2 is suitable for motion lights, alarms, smart home automation, and surveillance prototypes.

₹136

Sensors

HC-SR04 Ultrasonic Distance Sensor Module - Pack of 2

HC-SR04 Ultrasonic Distance Sensor Module is a non-contact distance measuring sensor designed for object detection, range finding, robotics, automation, obstacle detection, and Arduino-based electronics projects. It uses ultrasonic sonar technology with a transmitter and receiver to measure distance from 2 cm to 400 cm.

₹140

Sensors

DHT22 AM2302 Digital Temperature and Humidity Sensor

DHT22 AM2302 Digital Temperature and Humidity Sensor is a high-accuracy sensor designed for measuring surrounding air temperature and relative humidity. It provides calibrated digital output and can be connected with Arduino, Raspberry Pi, ESP boards, and other microcontrollers. It is suitable for weather stations, HVAC monitoring, data logging, home appliances, humidity regulation, and IoT environment monitoring projects.

₹299

Sensors

DHT11 Temperature and Humidity Sensor Module - Pack of 2

DHT11 Temperature and Humidity Sensor Module is a low-cost digital sensor module designed to measure surrounding air temperature and humidity. It provides calibrated digital output and can be easily interfaced with Arduino, Raspberry Pi, ESP boards, and other microcontrollers. This pack of 2 is suitable for weather stations, humidity monitoring, room environment projects, automation systems, and beginner electronics projects.

₹106

Optoelectronics

5mm Red LED Light Emitting Diode - Pack of 60

5mm Red LED Light Emitting Diode is a standard red indicator LED used for visual indication, electronics projects, breadboard circuits, PCB designs, dot board circuits, toys, lighting experiments, and DIY electronic builds. It has a 5mm body size and can be mounted on breadboards, PCBs, enclosures, and project casings using LED holders. This pack of 60 is suitable for electronics labs, student projects, repair work, prototyping, and bulk indicator LED requirements.

₹120

Optoelectronics

PC817 EL817 4-Channel Opto Isolator Bare PCB - Pack of 6

PC817 EL817 4-Channel Opto Isolator Bare PCB is a high-quality FR4 circuit board designed for building custom opto-isolated signal interface circuits using PC817 or EL817 optocouplers. The PCB provides layout support for four independent isolation channels, making it useful for separating low-voltage control signals from higher-voltage circuits, reducing electrical noise, and improving signal safety.

₹114

Optoelectronics

5mm Diffused Green LED - Pack of 200

5mm Diffused Green LED pack of 200 is a bulk value combo for indicator panels, Arduino LED experiments, Raspberry Pi display circuits, electronics labs, repair inventory, and student project kits.

₹229

Optoelectronics

5mm Blue LED Light Emitting Diode - Pack of 60

5mm Blue LED Light Emitting Diode is a standard through-hole LED designed for indication, decorative lighting, DIY electronics, breadboard circuits, Arduino projects, Raspberry Pi projects, control panels, status displays, and educational experiments. It emits a vibrant blue light and comes in a 5mm round body that is easy to mount on PCBs, dot boards, breadboards, and project enclosures.

₹120

Optoelectronics

5mm White LED Indicator Light - Pack of 100

5mm White LED Indicator Light is a standard through-hole light emitting diode suitable for indication, status display, DIY electronics, breadboard circuits, PCB assembly, Arduino projects, Raspberry Pi projects, control panels, opto-electronic sensor projects, and decorative lighting. It features a transparent lens, bright white illumination, compact 5mm round body, and reliable performance.

₹130

Optoelectronics

5mm RGB LED Common Cathode - Pack of 50

5mm RGB LED Common Cathode pack of 50 is a value combo for multicolor indicator displays, Arduino PWM color projects, Raspberry Pi lighting experiments, decorative electronics, and embedded project kits.

₹190

Optoelectronics

PC817 EL817 4-Channel Opto Isolator Bare PCB - Pack of 12

PC817 EL817 4-Channel Opto Isolator Bare PCB pack of 12 is a value combo for custom optocoupler modules, automation interfaces, relay isolation circuits, microcontroller protection, and electronics lab prototyping.

₹219